Toggle Nav
Minimum Order value $10
Silicone coated fiberglass sleeving
Silicone coated fiberglass sleeving/span>
Features:
-
Tightly braided fiberglass sleeve completely coated with acrylic resin to provide superior electrical and thermal protection.
-
Thermal Characteristics - UL/NEMA Thermal Class H (-70 to 200°C)
-
MIL-I-3190/6, MIL-P-18057 (grade A)
-
CSA rated
-
Flame Resistance - Passes UL 1441 (VW-1). Self-Extinguishing. NEMA TF-2 flame retardant
-
Available in NEMA sizes #24 (AWG) to 1". NEMA TS-1, Type 5
-
Excellent chemical resistance to: Acids, weak alkalis, esters, fungus and corona treatment
-
Dielectric Grade A: 8000V minimum average breakdown, 6000V minimum individual.
-
The coating maintains its electrical integrity - even under severe fireconditions - by forming a non-conductive ash.
-
High quality equivalent to: Ben-Har 1151-XL200A, Varflo sleeving, Hilec Turbo 117F, Hilec Vol-Sil Grade A, Alpha Wire PIF-200
| Size | Feet | Buy |
|---|---|---|
| 24 AWG | 500 FT/SPOOL | |
| 22 AWG | 500 FT/SPOOL | |
| 20 AWG | 500 FT/SPOOL | |
| 18 AWG | 500 FT/SPOOL | |
| 17 AWG | 500 FT/SPOOL | |
| 16 AWG | 500 FT/SPOOL | |
| 15 AWG | 500 FT/SPOOL | |
| 14 AWG | 500 FT/SPOOL | |
| 13 AWG | 500 FT/SPOOL | |
| 12 AWG | 250 FT/SPOOL | |
| 11 AWG | 250 FT/SPOOL | |
| 10 AWG | 250 FT/SPOOL | |
| 9 AWG | 250 FT/SPOOL | |
| 8 AWG | 250 FT/SPOOL | |
| 7 AWG | 250 FT/SPOOL | |
| 6 AWG | 250 FT/SPOOL | |
| 5 AWG | 250 FT/SPOOL | |
| 4 AWG | 250 FT/SPOOL | |
| 3 AWG | 250 FT/SPOOL | |
| 2 AWG | 250 FT/SPOOL | |
| 1 AWG | 100 FT/SPOOL | |
| 0 AWG | 100 FT/SPOOL | |
| 3/8" | 1000 FT/SPOOL | |
| 1/2" | 1000 FT/SPOOL | |
| 5/8" | 1000 FT/SPOOL | |
| 3/4" | 1000 FT/SPOOL | |
| 7/8" | 1000 FT/SPOOL | |
| 1" | 100 FT/SPOOL |
Silicon Fiberglass Braided Sleeving
Silicone coated fiberglass braided sleeving is used for insulation of leads and connections in electrical and electronic components ( transformers, coils, relays, solenoids etc.) where temperature range from –70°C through 200°C are encountered. Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70°C through +200°C. Operation at temperatures up to 315 ° C is tolerated for short durations. Exceeds all requirements of UL Subject 224 for 200 ° C, 600-volt operation. It also exceeds the requirements of MIL-I-3190, MIL-P-18057, and ASTM D372.
| Size | |
|---|---|
| AWG Size | ID |
| 24 | 0.022 |
| 22 | 0.027 |
| 20 | 0.034 |
| 18 | 0.042 |
| 17 | 0.047 |
| 16 | 0.053 |
| 15 | 0.059 |
| 14 | 0.066 |
| 13 | 0.076 |
| 12 | 0.085 |
| 11 | 0.095 |
| 10 | 0.106 |
| 9 | 0.118 |
| 8 | 0.133 |
| 7 | 0.148 |
| 6 | 0.166 |
| 5 | 0.186 |
| 4 | 0.208 |
| 3 | 0.234 |
| 2 | 0.263 |
| 1 | 0.294 |
| 0 | 0.33 |
| 3/8" | 0.387 |
| 7/16" | 0.45 |
| 1/2" | 0.512 |
| 5/8" | 0.64 |
| 3/4" | 0.786 |
| 7/8" | 0.893 |
| 1" | 1.018 |
Write Your Own Review