Diameter | Buy |
---|---|
1/8" | |
3/16" | |
1/4" | |
3/8" | |
1/2" | |
3/4" | |
1" |
Specifications/Approvals:
Military: AMS-DTL 23053/4 Class 1 (Formerly Mil-I-23053/4)
Underwriters Lab: UL 224 600V, 125°C, VW-1, (Jacket only), CSA
Crosses to: Sumitomo W5DL, Raychem SCL, Alpha FIT-300, 3M MW, Canusa CPA-300, LG GSHS-3625WS
Our heat shrink tubing is also available with a "melt-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.
100 foot minimum - Black only | ||
AMS-DTL-23053/4- | Nominal ID | Part # |
101-0 | 1/8" | HS3AR-0125 |
102-0 | 3/16" | HS3AR-0188 |
103-0 | 1/4" | HS3AR-025 |
104-0 | 3/8" | HS3AR-0375 |
105-0 | ½" | HS3AR-050 |
106-0 | ¾" | HS3AR-075 |
107-0 | 1" | HS3AR-100 |