Preflattened 3:1 Printable Heat Shrink Tubing
3 to 1 Pre-flattened Polyolefin Heat Shrink Tubing
Features
- 3:1 Shrink Ratio (shrinks to 1/3 its original diameter)
- Meets requirements of AMS-DTL-23053/5 (formerly MIL-I-23053/5), Classes 1, 3
- UL 224 VW-1 and CSA OFT recognized
- Maximum Continuous use temperature 135C
- Shrink Temperature of 100°C and operating temperature of -55°C to + 135°C
- Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
| Diameter | Buy |
|---|---|
| 1/8" | |
| 3/16" | |
| 1/4" | |
| 3/8" | |
| 1/2" | |
| 3/4" | |
| 1" | |
| 1-1/2" |
3 to 1 Pre-flattened Polyolefin Heat Shrink Tubing
Because of the large demand for preprinted heat shrink, there are many heat shrink printers on the market. Some of these printers are just modified label printers, which can't handle thick media. In order to accommodate these label printers and be able to print on heat shrink tubing with them, there is a need for flat heat shrink. In response to this need, we have added a new pre-flattened heat shrink tubing to our line. Featuring the same properties as our standard 3:1 heat shrink tubing our pre-flattened heat shrink is specially designed and spooled for use on thermal transfer label printers. Available in Yellow and White in a variety of sizes
- Dimensions & Technical Specs
|
Nominal Size (Diameter)
|
Part Number | Size after shrinking | Flattened Width |
| 3/32" | HS3F-0094 | 0.031 | 1/8" |
|
1/8"
|
HS3F-0125
|
0.039
|
3/16"
|
| 3/16" | HS3F-0188 | 0.059 | 5/16" |
|
1/4"
|
HS3F-025
|
0.078
|
3/8"
|
|
3/8"
|
HS3F-0375
|
0.125
|
9/16"
|
|
1/2"
|
HS3F-050
|
0.167
|
13/16"
|
| 3/4" | HS3F-075 | 0.25 | 1-3/16" |
| 1" | HS3F-100 | 0.375 | 1-9/16" |
| 1-1/2" | HS3F-150 | 0.5 | 2-3/8" |
Write Your Own Review