Datamax I-Class Mark II I-4212E Printer

Datamax I-Class Commercial Label and Heat Shrink Printer

  • Thermal transfer and direct thermal printing of bar codes, text, and graphics on demand and batch printing
  • Thin film print head with SEAQ (Sequential Energy Adjustment for Quality)
  • Datamax Programming Language (DPL)
  • 32bit multitasking 90Mhz Motorola ColdFire® Processor
  • 16MB RAM memory
  • 2MB Flash downloadable program memory (firmware)
  • Serial RS-232 port
  • IEEE 1284 compliant bi-directional parallel port
  • Gap, notch and reflective top of form media sensing
  • 5 button 2 line 20 character back-lit LCD display
  • Configuration settings via front panel menu,
  • No dipswitches.
  • Menus in English, French, Italian, German and Spanish
  • Configuration label makes set-up easy to understand
  • Die-cast aluminum frame
  • Simple ribbon and media loading
  • Rotating media hub for 1.5” and 3.0” supply rolls
  • Clear window in media cover -- easy to view supplies.
  • Media tear bar
  • Fan-fold media handling from bottom or rear of printer
  • AGFA font engine with CG Triumvirate™ Scalable font
  • Datamax printer driver for Windows 98 and above desktop operating systems.
Optional Components Buy
Datamax I-Class Mark II I-4212E Printer
$1,985.00 K-I-4212
Datamax I-Class Mark II I-4212E Printer with Bartender Basic Edition
$2,220.00 K-I-4212+soft
Datamax I-Class Mark II I-4212E Printer plus ethernet (wired LAN)
$2,335.00 K-I-4212-ETH
$350.00 K-I-ETHERNET
Optional USB Port for Datamax I-Class printer
$135.00 K-I-USB
Parallel cable for Datamax I class printers (No charge with purchase of Datamax printer)
$6.00 K-PAR
Parallel to USB cable - Centronics 36 Pin Male to USB 1.1 for Kroy and Datamax Printers
$20.00 K-PAR-USB
USB cable for Datamax I class printers
$15.00 K-USB

Datamax I-Class Commercial Label and Heat Shrink Printer

Printing Specifications

  • Nominal Print Head Dot Size: .0027” (.07mm) W x .0043” (.11mm) L
  • Print Speeds: programmable from 2” (51mm)/sec through 8” (200mm)/sec in ½” (12mm) increments
  • Print length range: .25” to 99.99” programmable

Media Specifications

  • Maximum print width: 4.16” (105.6mm)
  • Maximum label length: 99.99” (2.54m)
  • Maximum media width (label plus liner): 4.65” (118mm)
  • Media Width Range: 1” (25mm) to 4.65” (118mm)
  • Media Core ID Range: 1.5” (38mm) – 3.0” (76.2mm)
  • Minimum label length:
    - Tear off mode: .25” (6.35mm)
    - Peel mode: 1.00 (25mm)
    - Rewind mode: .25” (6.35mm)
    - Cutter mode: 0.50 (12mm)
  • Media thickness (label & liner): .0025” to .010” (.06mm to .25mm)
  • Maximum full-width media thickness for cutter: .010” (.25mm)
  • Maximum media roll size: 8.0” (203mm)
  • Fan fold media: loads through rear or bottom of printer
  • Gap and notch sensing standards:
    - Gap between labels: 2-4 mm, 3mm standard
    - Sensing notch: .25” (6mm) W x .12” (3mm) L
    - Sensing hole: 0.08” (2.0mm) diameter
    - Black Mark on back of label: minimum length of 2 mm (0.08”) long and 12 mm (0.47”) wide

Ribbon Specifications

  • Ribbon width range: 1” (25m) to 4.5” (114mm)
  • Standard ribbon lengths: 300m (984’), 450m (1476’) and 600m (1969’)
  • Standard ribbon wound coated side in, optional field installable thermal transfer mechanism supports ribbons wound coated side out.

Communications Specifications

  • One EIA RS-232/DB-25 serial connector. 2400, 4800, 9600, 19.2K and 38.4K baud supported.
  • One IEEE 1284 Compliant Parallel interface port
  • One internal connector for use with an external media cutter and present sensor
  • Optional SNMP Internal Ethernet Adaptor supporting 10/100 mbps transfer rate with 10-Base-T connector
  • Optional Internal USB interface

Internal Font Sets

  • Nine Bit-Mapped Fonts, rotatable 0, 90 180, 270 degrees
  • CG-Triumvirate™ Scalable Font
  • CG Triumvirate™ Condensed Bold Scalable Font

Bar Code Symbologies & Specifications

  • Bar Code Modulus: 5 mil to 110 mil “X” dimension in picket fence or ladder orientations
  • All printed barcodes meet the requirements of ANSI Document X3A1-3, Guideline for Barcode Print Quality, Grade A
  • Supported Barcode Symbologies include Code 39 (used to produce industry standards such as AIAG, HIBC, LOGMARS), Interleaved 2 of 5, Code 128 (Subsets A,B,C), Codabar, LOGMARS, UPC-A, UPCE, UPC2&5 digit addendums, EAN-8, EAN-13, EAN 2&5 digit addendums, UPC random weight, Code 93, Plessey, Universal Shipping Container Symbology, Code 128 MOD 43, Postnet, USS/EAN-128 random weight, Telepen, UPS MaxiCode (Mode 2 & 3), QR Code, PDF417, Datamatrix, EAN 128 support (with function character support, ITF support)

I-Class Limited Warranty:

  • I-Class carries a 1-year or one million inch (whichever comes first) warranty on the printhead and rollers.
  • All other parts are covered for 3-years or three million inches

Write Your Own Review
You're reviewing:Datamax I-Class Mark II I-4212E Printer
Your Rating